
No heat in a Waltham house usually shows up the same way: you wake up to a cold first floor, or you come home after dark and the thermostat is calling for heat but the rooms have not moved. On a two-family, one unit may still be warm while the other is not, because each floor often has its own furnace in the basement or a closet.
Sometimes the furnace is completely silent. Sometimes it tries: the inducer starts, the igniter glows, and then the burners never stay lit. Sometimes the blower runs steadily and the vents just blow cold air. Those are different failures (a board, an igniter, a flame sensor, a gas valve, a limit switch), but from the living room they all feel the same. The house is cold, and the system is not making heat.
A power flicker during a storm can also leave an electronic control board in a bad state, or trip a switch at the top of the basement stairs that someone later forgets to reset. On high-efficiency furnaces, a frozen condensate line after a sharp drop into the 20s will lock the unit out even though everything else looks normal. If you want more background on the equipment itself, see furnace repair in Waltham.
Call (857) 387-3530 if the heat is already out. If a single added room is cold but the rest of the house is fine, that room may be on a ductless mini split instead of the furnace.
No Heat in Waltham: Questions
The thermostat is on, but nothing is happening at the furnace. What should I check first?
Confirm the thermostat is set to heat and the set point is above the room temperature. Check that the switch on the side of the furnace is on, and that a breaker or emergency switch near the basement stairs has not been bumped. If the furnace still stays silent, or it clicks and never lights, call us.
The blower is running, but the air from the vents is cold. Is that no heat?
Yes. The furnace is circulating air without a flame, or the flame is dropping out. That can be an igniter, a flame sensor, a gas valve or a limit switch. Turn the system off if it keeps trying and call for no heat furnace repair in Waltham.
Can a high-efficiency furnace shut itself down because of ice?
It can. Many Waltham replacements vent out a side wall and drain condensate to a pump or a floor drain. After a cold snap, a frozen or clogged condensate line will cause the furnace to lock out, and the house goes cold even though the unit looks new.
Is this different from regular furnace repair?
It is the same trade, just a more urgent symptom. If the heat is uneven or the unit has been noisy for weeks, start with furnace repair in Waltham. If the house is already cold, this is the call to make.
